ZJBENY BYH Isolator Honored To Be A Good Example To Show AS/NZS5033:2014 Compliance

ZJBENY BYH Isolator Honored To Be A Good Example To Show AS/NZS5033:2014 Compliance

Apr 22, 2019

Clean Energy Council in Australia has issued the latest Grid-connected solar PV Systems-install and supervise guidelines for accredited installers version 13 this April in 2019. For a better understanding of whether an isolator is compliant with AS/NZS5033:2014 Amendment 2, it is an honor for ZJBENY BYT-32 isolator to be selected as a good example for the public in the guidelines. It is the first company which can fully comply with concerned front marking requirements worldwide. 

BYT-32 DC isolator Australia compliant

ZJBENY BYT-32 is a subsidiary of ZJBENY BYH series and has been widely sold to more than 30 countries. According to the guidelines, the following information shall be displayed on the face of the isolator and be visible once installed: 

  • symbol for isolation under load

  • indication of open and close positions of switch actuator

  • manufacturers name or trade mark

  • model number/serial number/type designation

  • wording ‘IP56NW’

  • wording ‘AS 60947-3’ 

DC isolator-BENY
ZJBENY BYT-32 is selected as a good clue to show how marking should present on page 20 in the guidelines file.

ZJBENY BYT-32 series isolator has an individual dedicated enclosure that are installed outdoors are fully complied with AS 60947.3:2018 DC-PV2. To improve the safety, performance and reliability of solar photovoltaic power systems installed in the outdoors field, ZJBENY has developed the BYH/BYT series based on 25 years industrial experience and deep understanding of customers’ requirements. ZJBENY is the first manufacturer in the world that gets the valid certificate of PV2 standard for the DC isolator switch in Australia solar photovoltaic market after strict testing.  

More product information can be found at: